Fix loose tiles by hand, with no caulking gun
Injectafix Easy Squeeze re-bonds loose and hollow-sounding floor tiles without lifting them, and you don't need any tools to apply it. Drill a 3mm hole in the grout line, squeeze the tube and the adhesive flows into the gap under the tile. Weight the tile, leave it 24 hours, and walk on it again. It's the same adhesive as Injectafix Pro, in a squeezable tube made for one-off repairs at home.
Quick specs
| Hole size |
3mm, drilled through the grout line |
| Tool needed |
None. Squeeze by hand |
| Coverage |
About 2–3 sq ft of hollow area per 350ml tube |
| Cure time |
24 hours |
| Application temperature |
5–30°C |
| Underfloor heating |
Suitable for all types |
| Floors |
Ceramic, porcelain and marble tiles; natural stone if the stone is sealed |
| What's underneath |
Concrete, screed, timber or ply |
| Wet areas and outdoors |
Yes, as long as the joints are regrouted and sealed |
| Made in |
UK |
| Dispatch |
Same day on orders placed before 1pm |
How many tubes do I need?
One 350ml tube fills about 2–3 sq ft of hollow area.
| Hollow area |
Tubes |
Typical job |
| Up to 3 sq ft |
1 |
2–3 small (300×300mm) tiles |
| 6–9 sq ft |
3-pack |
A few large tiles, or a patch by a doorway |
| 8–12 sq ft (about 1m²) |
4-pack |
A hollow area in a kitchen or hallway |
| 12–18 sq ft |
6-pack |
Several areas, or a larger room |
| 24–36 sq ft (2–3m²) |
12-pack |
Several rooms |
The actual amount depends on how deep the gap is under the tile. If you're unsure, start with a 3-pack.
How to fix a loose tile with Easy Squeeze
-
Find the hollow area. Tap each tile with the handle of a screwdriver. A hollow tile sounds dull compared with its neighbours. Press the corners to check for movement.
-
Drill a 3mm hole through the grout line next to the hollow area.
-
Squeeze Injectafix into the hole, following the pack instructions.
-
Wipe off any excess straight away with Perfect Finish wipes.
-
Weight the tile and leave it undisturbed for 24 hours.
-
Fill the hole with Twist & Grout in a matching colour. In showers, wet areas and outdoors, seal the joints afterwards.
Easy Squeeze or Pro cartridge?
| |
Injectafix Easy Squeeze |
Injectafix Pro (cartridge) |
| Adhesive |
Same formula |
Same formula |
| Hole size |
3mm |
2mm |
| Tool needed |
None, squeeze by hand |
Caulking gun |
| Best for |
One-off repairs at home |
Several tiles, trade use, the neatest finish |
When Injectafix is the right repair
Injectafix is for intact tiles that have come loose from a sound floor. It is not a repair for rot, structural failure or tiles that are cracked right through. Check for movement and the condition of the floor before you start. For other floor types, check the flooring manufacturer's instructions.
Full step-by-step guide: how to fix loose floor tiles without removing them. Not sure which product you need? Find the right Floor-Fix Pro product for your floor problem.
Frequently asked questions
Do I need a caulking gun?
No. Easy Squeeze is squeezed by hand. If you have a caulking gun and several tiles to fix, the Pro cartridge gives a neater finish through a smaller 2mm hole.
What size hole do I drill?
3mm, through the grout line.
Can I use it with underfloor heating?
Yes. It's suitable for all types of underfloor heating.
How long until I can walk on the floor?
Leave the tile weighted and undisturbed for 24 hours.
What temperature can I use it at?
Between 5°C and 30°C.
Is Injectafix suitable for wet rooms and outdoor areas?
Yes, as long as you seal the floor afterwards with a quality grout. We strongly recommend Twist & Grout.
Does it work on natural stone and marble?
Marble, yes. Other natural stone, only if the stone is sealed.
Will it work on tiles laid over timber or ply?
Yes, as long as the timber or ply is sound.
Will it fix a cracked tile?
No. A tile that's cracked right through needs replacing.
My grout keeps cracking. Will this help?
Often, yes. Grout that keeps cracking usually means the tile underneath is loose. Re-bond the tile first, then regrout. Read more: why cracked grout is usually a tile problem.
Can I use Injectafix to fix my entire floor or just a small area?
Both. Injectafix is designed to be quick to apply, even over a large area, because it goes in through our own custom injection tips, made specifically for injecting adhesive into floors quickly and reliably. We design and make our own tips for this job rather than relying on repurposed syringe bottle tips or syringes, which many floor repair products use. If you have ever tried to repair a large area of floor with a syringe tip, you will know they can be messy, unreliable and easy to break. For a large area, the Injectafix Pro cartridge with a caulking gun is the quickest option.
How long has Floor-Fix Pro been around?
Floor-Fix Pro was founded in the UK in 2018 by Paul Lanzarotti, who was frustrated by the lack of quality floor repair products on the market. Today Floor-Fix Pro products are sold in over 40 countries and are widely regarded as the trade-grade answer to floor repair.